5-Grid vs. 14-Grid White Hexagon LED Lights: Exact Carton Packing Lists, Component Dimensions & Power Lead Guide
Zhongshan BONTOP Lighting Co., Ltd. · Published 2026-11-20
For wholesale distributors, car wash contractors, and auto detailing studio installers—especially across commercial projects in the Middle East and Africa—generic marketing claims like "easy installation" do not prevent job-site delays. Real-world buyer feedback, including recent retail trial reviews pointing out mounting hardware with zero spare allowance and shorter-than-expected power cords, highlights a clear operational rule: contractors need exact carton counts, dual-unit dimensions (metric + imperial), verified cable lengths, and a transparent split between what comes in the box and what must be ordered separately.
Based on the factory specifications for our two core white hexagon kits—5-Grid White Kit and 14-Grid Borderless White Kit—alongside the linear tube and transparent connector hardware shown in our component sections, below is the complete packing manifest, circuit load limit, and pre-installation checklist to verify before ordering or shipping.
Compare the 5-grid H layout, 5-grid staggered layout and 14-grid borderless layout. The two 5-grid arrangements use the confirmed 5-grid packing list below; choose the geometry from the product drawing. Overall layout dimensions and carton size remain specific to each product page.
1. Exact Carton Packing List: 5-grid white kit vs. 14-grid borderless white kit
Both modular systems are built around the 440 mm LED light tube (440 mm luminous tube length / 571 mm overall span with end caps, 25 mm width) and transparent connectors molded with built-in mounting eyelets.
| Component / Specification | 5-Grid White Kit | 14-Grid Borderless Kit | Included in Carton vs. Add-On |
|---|---|---|---|
| LED Light Tubes (440 mm) | 24 PCS (440 mm tube / 571 mm span, 25 mm width) | 57 PCS (440 mm tube / 571 mm span, 25 mm width; 7W/tube rated on spec) | Included in box (Exact count for assembly; order spare tubes separately) |
| 120° V-Connectors (2-Way) | 11 PCS (with built-in screw-mount eyelet) | 17 PCS (with built-in screw-mount eyelet) | Included in box (Used for outer perimeter corners) |
| 120° Y-Connectors (3-Way) | 9 PCS (with built-in screw-mount eyelet) | 27 PCS (with built-in screw-mount eyelet) | Included in box (Used for interior shared junctions) |
| Total Grid Mounting Junctions | 20 junctions (11 V + 9 Y) | 44 junctions (17 V + 27 Y) | Integrated connector eyelets (No separate snap-on tube clips needed) |
| Nylon Zip Ties (Grid Ceilings) | 30 PCS (20 mounting points + 10 spares) | 60 PCS (44 mounting points + 16 spares) | Included in box (For T-bar or open grid ceilings) |
| Power Input Cable | 1 PC — 5 FT (approx. 1.5 m) cord with plug | 1 PC — 5 FT (approx. 1.5 m) cord with plug | Included in box (Longer leads/extensions sold separately) |
| Flat-Ceiling Screws & Anchors | Not included in standard carton | Not included in standard carton | Installer-supplied or optional add-on (Match to ceiling substrate) |
| Total Power & Single-Feed Limit | 200W total (Max 360W per single power cord) | ~342W–399W depending on batch tube wattage (57 × 7W = 399W nominal); Max 360W per single cord | Safety rule: Keep every single power feed below 360W; split loads exceeding 360W onto separate feeds |
| Location Rating | Dry indoor locations only (Not suitable for outdoor use) | Dry indoor locations only (Not suitable for outdoor use) | Install strictly in dry indoor ceiling zones away from water spray |
2. How to Verify Component Hardware Before Ceiling Mounting
Matching the physical component photos on our product pages against your ceiling layout prevents mid-job shortages:
- Linear LED Tubes (440 mm): White faceted tube profile measuring 440 mm in tube length (571 mm overall span, 25 mm width) with recessed two-pin connector sockets on each end. Each 5-grid white kit carton contains 24 tubes and each 14-grid borderless white kit carton contains 57 tubes; spare tubes should be ordered separately if job-site backups are required.
- 120° V-Connectors & 120° Y-Connectors: Transparent housings with internal brass-tone contact pins and a molded circular mounting eyelet on every joint. Because every junction has an integrated eyelet, separate plastic tube clips are unnecessary. For open grid ceilings, fasten all 20 junctions (5-grid) or 44 junctions (14-grid) using the included nylon zip ties (30 PCS or 60 PCS, leaving 10 or 16 spare ties). For flat drywall, wood, or concrete ceilings, drive screws directly through the eyelets using fasteners matched to your ceiling substrate.
- 5 FT (1.5 m) Power Lead & 360W Circuit Rule: Each carton includes one 5 FT (approx. 1.5 m) plug-in power cable. If your ceiling height exceeds 2.7–3.0 m (9–10 ft) or the outlet sits lower on the wall, plan ahead with an extension lead or hardwire jumper. Per factory electrical safety limits, total output connected to a single power cord must remain under 360W—never daisy-chain two 200W 5-grid white kits onto one cord, and divide 14-grid borderless white kit grids onto separate feeds whenever total load reaches or exceeds 360W. Always connect and power-test the full grid on the floor before lifting it to the ceiling.



Electrical planning note: the 360 W figure is the supplied single-cord load limit, not a universal branch-circuit rating. The 14-grid kit varies by batch: a 342 W batch is below that limit, while a 399 W batch exceeds it. Do not energize a kit at or above 360 W through one such cord. Obtain the manufacturer-approved wiring arrangement and any additional leads before installation. Separate feeds must serve electrically isolated sections; never attach multiple live feeds to one electrically continuous grid. A qualified electrician must plan and carry out electrical work and testing to the applicable local requirements. Disconnect power before assembly, changes or lifting.
3. Recommended Add-On SKUs for Wholesale & Multi-Bay Orders
For wholesale distributors and commercial contractors stocking 5-grid white kits or 14-grid borderless white kits for workshops, detailing bays, or regional distribution across the Middle East and Africa, consider adding:
- Spare 440 mm LED Tubes (e.g., 2–5 backup tubes per 10 kits for transit or on-site replacement)
- Spare 120° V-Connectors (2-Way) & 120° Y-Connectors (3-Way)
- Extended Power Cables / Hardwire Input Cables when the power connection point is farther than 5 FT (approx. 1.5 m) from the grid
- Ceiling-Specific Screw & Anchor Packs for flat ceiling installations
Frequently Asked Questions (FAQ)
Are separate mounting clips included in the 5-grid white kit and 14-grid borderless white kit cartons?
No separate snap-on tube clips are included or required. Every 120° V-connector and 120° Y-connector has a built-in mounting eyelet at each grid vertex (20 points on 5-grid white kit, 44 points on 14-grid borderless white kit). Standard cartons include 30 nylon zip ties (5-grid) or 60 nylon zip ties (14-grid) for grid ceilings, while flat-ceiling screws and anchors are supplied by the installer or ordered separately.
How long is the included power cord, and how many kits can run on one power feed?
Each standard kit includes one 5 FT (approx. 1.5 m) power cable with a plug. Total load on a single power cord must stay below 360W, so two 200W 5-grid white kits cannot be daisy-chained onto one cord. For a 14-grid borderless white kit (57 tubes, 7W/tube nominal), confirm the batch wattage and manufacturer-approved wiring. If separate feeds are needed, they must serve electrically isolated sections, each below 360W. Never attach multiple live feeds to one electrically continuous grid.
Can these white hexagon kits be installed in car wash bays or outdoor areas?
Both 5-grid white kit and 14-grid borderless white kit are rated for dry indoor locations only (Not suitable for outdoor use). In car wash facilities, mount fixtures strictly in dry upper ceiling zones away from direct water spray and dense steam, and house all electrical connections inside dry enclosures.
How can I request a ceiling layout and bulk quote for my workshop or wholesale order?
Send your ceiling length/width dimensions, ceiling structure (open grid or flat ceiling), and target kit quantity via WhatsApp to +86 133 8088 2996 (https://wa.me/8613380882996) for a layout and itemized packing quote.
5-Grid White Lights · H Layout
200 W kit with the confirmed 24-tube packing list.
5-Grid White Lights · Staggered
A separate arrangement using the confirmed 5-grid carton specification.
14-Grid White Lights · Borderless
57 tubes; 342–399 W by batch. Confirm the approved power-feed arrangement.
Car Wash Lighting Planning
Review dry installation zones and exposure conditions before ordering.
Garage and Workshop Lighting
Send the available ceiling dimensions, mounting surface and task.
Parts and Accessories
Match spare tubes, connectors and power leads to the original kit.
Request an Itemized Wholesale Quote
Include layout, complete-kit quantity, destination and ceiling details.
What should you send with the ceiling dimensions?
Include the destination market. You can also contact sales before the form.
