Lighting Solution

Car Wash Bay Lighting

Car wash bay lighting is the modular LED ceiling over a wash bay. LUXBONTOP covers that bay with honeycomb and hexagon kits, from the 987 × 987 mm single cell at 46 W to the unframed 14-hex layout at 4070 × 2390 mm and 342–399 W. White kits are rated AC110–265V, and the drivers support 50/60 Hz.

Last updated:

Modular ceiling layouts for professional wash bays where bright, organized lighting supports a premium customer experience.

In brief: this page explains the car wash bay lighting layout, related lighting systems and the project details needed for a configuration review.

Since 2016 · 2,200 m² factory · MOQ 10 sets (10 complete kits) · 2-Year Warranty

Honeycomb LED ceiling lighting in a professional car wash bay
Solution approach

How do you plan lighting around the bay?

✓ Full-bay honeycomb and framed layouts

✓ White-light and RGB-frame options

✓ Layout proposal based on bay dimensions

Final configuration depends on the actual space dimensions and selected product system.

Compare before ordering

5-Hex or 14-Hex: which layout fits your ceiling?

Start with the available ceiling space, not the hexagon count alone. These are two white-light layouts without an outer frame. The dimensions below describe the assembled kit, not a guaranteed illuminated area or a recommended bay size.

5-Hex White · H layout

The smaller overall footprint is a starting point when the available ceiling area is limited.

Overall size
2444 × 1707 mm
Rated power
200 W
Input voltage
AC110–265V
Colour temperature
6500 K
Outer frame
Without frame

14-Hex White · Staggered

The larger footprint needs more ceiling space. Power is batch-dependent; confirm the approved feed arrangement.

Overall size
4070 × 2390 mm
Rated power
342–399 W
Input voltage
AC110–265V
Colour temperature
6500 K
Outer frame
Without frame

Measure the installation space

Send the available ceiling length × width, mounting height and number of bays. Mark beams, door tracks, pipes and other obstacles on a drawing or ceiling photo. Include the mounting surface, power supply and any splash or washdown exposure for a configuration review.

Wholesale order or project enquiry?

Wholesale: send the selected layout / SKU, number of complete kits and destination country. Project: send the bay length × width × height, obstacles and preferred lighting layout. If you have not chosen a kit, request a car wash layout review.

Confirm the final drawing, electrical and mounting requirements before ordering. A kit fitting within the ceiling dimensions does not by itself confirm lighting coverage or suitability for wet areas.

What lighting works best in a car wash bay?

Car wash bay lighting on this page is a modular honeycomb or hexagon LED ceiling over the wash bay. The same tubes and connectors build a white-light grid or an RGB layout, with or without an outer frame.

Compare the published drawing with the bay you measure. This page does not name one kit as the best layout for every bay.

How many hexagon kits does one wash bay need?

No kit count is published for one wash bay. Fit the measured ceiling to these confirmed drawings: 1-Hex is 987 × 987 mm at 46 W, 11-Hex is 3389 × 2444 mm at 368 W, the unframed 14-Hex is 4070 × 2390 mm at 342–399 W, and the framed 14-Hex reference is 4845 × 2435 mm at 672 W.

Do the kits work on 220V or 110V power?

Yes. A 110 V or 220 V supply is covered by the white-hexagon rating. White hexagon kits are rated AC110–265V. Their drivers support 50/60 Hz. The framed special-shape, 3 Colors Change and high-brightness RGB family pages still state AC85–265V on their own pages. Low-voltage RGB kits are DC24V / DC5V.

FAQ

What do buyers ask before ordering?

What is the minimum order for car wash bay lighting?

Production orders start at 10 sets (10 complete kits) for every product. A set is one complete kit.

How should a buyer contact the factory?

Use the contact page or the project form. Zhongshan BONTOP Lighting Co., Ltd. manufactures LUXBONTOP lighting in Henglan, Zhongshan, Guangdong, China.

01

Share space

Dimensions, photos or drawing.

02

Select style

Honeycomb, framed, RGB or custom.

03

Confirm layout

Review configuration and dimensions.

04

Request quote

Move the project into commercial discussion.

Get a quote