Workshop

How should you plan workshop LED lighting?

Workshop LED light should fall on the work, not only on the ceiling. A hexagon grid lights the bay from several tubes and softens a single hard shadow. LUXBONTOP does not publish a lux rating for these kits. White pages state 6500 K and CRI 80. Mount the named layout over the car or the bench.

Published 2026-11-09

Last updated:

LED hexagon grid lighting across an auto workshop ceiling

Workshop lights fail when the bright part of the ceiling is not the place where someone stands. Lux, CRI, shadows and mounting are four separate questions. This page keeps them separate, and it does not invent a lux number for a LUXBONTOP kit.

What does lux describe, and why is it not on the product page?

Lux is illuminance on a surface. It changes with ceiling height, wall colour, the size of the grid and where you hold the meter. A wattage on a drawing is not a lux figure. LUXBONTOP does not publish lux for these kits. A lighting designer or electrician can measure the finished room.

Workplace guides often talk about higher illuminance for detailed bench work than for walking space. Use that as a planning idea. Do not treat it as a rating of the product in the carton.

How do CRI and shadows affect a workshop?

CRI describes colour rendering in general. The white hexagon pages state CRI 80. This site does not publish CRI 90+ or a test of how many defects that index reveals.

One small lamp over a bench throws a hard shadow behind the worker. A grid of tubes spreads light from several directions, so the shadow is softer. The grid still has to cover the bench or the car. A grid over the empty aisle does not light the job.

Rectangular honeycomb LED lighting in an auto workshop
Workshop ceiling. The photo shows a grid over the bay. It is not a lux measurement.

Where should the lights be mounted?

Mount the layout over the work, clear of door tracks, hoists and beams. Mark the overall size of the named drawing on the floor before anyone is at ceiling height. White kits on the product pages are rated AC110–265V. Drivers support 50/60 Hz. Final wiring belongs to a qualified electrician.

The garage and workshop lighting page collects the same families. The installation guide covers the floor layout before the lift.

Which workshop lights are published here?

The unframed 14-hexagon layout is 4070 × 2390 mm at 342–399 W. The 11-hexagon layout is 3389 × 2444 mm at 368 W. The single cell is 987 × 987 mm at 46 W. The minimum order is 10 sets (10 complete kits). No price is published on this page.

How many lux are these workshop lights?

No lux figure is published for LUXBONTOP kits. Lux depends on the room. Measure it after installation if a specification requires a number.

Will a hexagon grid remove shadows?

A grid lights the bay from more than one direction, so shadows are softer than under one lamp. It does not remove every shadow. Place the grid over the work.

What CRI is published for the white kits?

CRI 80 on the white hexagon pages and the framed family page. CRI 90+ is not a published rating here.

Where to go next

← All guides

Have a project in progress?

What should you send with the ceiling dimensions?

Include the destination market. You can also contact sales before the form.

Request a Lighting Proposal
Get a quote